How to Program a Chamberlain Garage Door Opener - Method 1

An opener for your garage door is an undervalued convenience that’s come with modern technology. But how do you program one? In this guide, we’ll show you how to set up your Chamberlain garage door opener with a remote control or door opener keypad. Pretty soon, it’ll be easier than ever for you to open up your garage door and get inside as fast as possible. Read on for our comprehensive walkthrough on how to program a Chamberlain garage door opener.

Method1

Programming a Remote Control with the Door Control

1. 
   1. Press the “Learn” button on your door control, if it has one. Not all door controls (the device on your wall you can use to open your door) will have learn functions, but yours may. If your door control has a plastic cover that’s able to be lifted off, it may be located right underneath it. Press this button once to access the door control’s pairing mode.^[1]

   • If your door control looks more like a doorbell, you may be able to access the “Learn” function by holding the light button on the side of the device while pressing and releasing the front button.^[2]
   • If you have a smart door control, you can activate pairing mode through its menu. Navigate to the program tab of the menu, then select “remote.”^[3]
2. 
   2. Push a programmable button on your remote control. Select and press one of the face buttons on your remote control—it doesn’t matter which one. The garage lights will flash, or you might hear 2 clicks. This tells you that you’ve successfully programmed your remote control.^[4]

   • Some types of remote controls, like the Chamberlain Universal Remote, may need to be put into pairing mode before they can be programmed. If you press the bottom button for 15 seconds, then release it, the remote will be in pairing mode for 60 seconds.^[5]
3. 
   3. Use your remote control to test out your garage door opener. If the garage door opens, the device has been successfully programmed. If not, you may have objects near the door obstructing it. If this isn’t the problem, you may have to try programming the remote control with the garage door opener (the box attached to your ceiling).^[6]

^{https://www.wikihow.com/}